Induction Heater IH 090

to heat smaller to medium-sized rolling bearings up to 150 kg

ih 4

simatherm Induction Heater IH 090

The IH 090 is ideal for the heating of medium-sized bearings up to 150 kg. This series comes equipped with a swivel arm as well as three yokes in various sizes.

Thanks to its integrated air cooling system the IH 090 is built for repeated mounting and continuous use.

The IH 210 is intended to heat large work pieces up to 300 kg.

The IH 210 comes equipped with 2 yokes. Due to the sliding yoke, one can mount and remove the work piece.

An additional benefit of IH210 is its built in air-cooling system, which allows continuous operation.

Technical data

Criteria

Designation

Designation

IH 090/400 V, 50 Hz - 460 V/60 Hz
IH 090/500 V, 50 Hz - 575 V/60 Hz

Workpiece
- Maximum weight
- Bore diameter


150 kg
20–400 mm

Temperature control
- Range
- Magnetic probe
- Accuracy (electronics)


0–250°C
Type K
± 3°C

Time control
- Range
- Accuracy


0–60 minutes
± 0.01 seconds

Maximum temperature

400°C

Thermometer mode

Yes

Bearing temperature mode

Yes

Power reduction

4 steps / 20-40-60-80 %

Automatic demagnetisation
Residual magnetism

Yes
< 2 A/cm

Suitability for sealed bearings

Yes

Suitability for pre-greased bearings

Yes

Error guiding codes

Yes

Thermal overload protection

Yes

Maximum magnetic flux

1.5 T

Control panel

Keyboard with LED display

Size of the operating area (WxH)

145 x 205 mm

Coil diameter

115 mm

Dimensions (WxDxH)

420 x 280 x 420 mm

Overall weight including yokes

38 kg

Maximum power consumption

6.4 / 7.4 kVA

Standard yokes

14 x 14 x 275 mm
28 x 28 x 275 mm
55 x 55 x 275 mm

Core cross section

55 x 55 mm

Yoke storage

Yes, internal

Sliding arm

-

Swivel arm

Yes

Cooling fan

Standard

Housing material

Aluminium

Contact