Induction Heater IH 210

to heat large rolling bearings
up to 300 kg

ih 5

simatherm Induction Heater IH 210

The IH 210 is intended to heat large work pieces up to 300 kg. The IH 210 comes equipped with two yokes. Due to the sliding yoke one can mount and remove the work piece.

An additional benefit of the IH 210 is its built in air cooling system (IH 210F), which allows continuous operation or even a higher platform for larger work pieces (IH 210XL).

Technical data

Criteria

Designation

Designation

IH 210/400 V, 50 Hz - 460 V/60 Hz
IH 210/500 V, 50 Hz - 575 V/60 Hz

Workpiece
- Maximum weight
- Bore diameter


300 kg
60–640 mm

Temperature control
- Range
- Magnetic probe
- Accuracy (electronics)


0–250°C
Type K
± 3°C

Time control
- Range
- Accuracy


0–60 minutes
± 0.01 seconds

Maximum temperature

400°C

Thermometer mode

Yes

Bearing temperature mode

Yes

Power reduction

4 steps / 20-40-60-80 %

Automatic demagnetisation
Residual magnetism

Yes
< 2 A/cm

Suitability for sealed bearings

Yes

Suitability for pre-greased bearings

Yes

Error guiding codes

Yes

Thermal overload protection

Yes

Maximum magnetic flux

1.5 T

Control panel

Keyboard with LED display

Size of the operating area (WxH)

250 x 250 mm

Coil diameter

135 mm

Dimensions (WxDxH)

600 x 350 x 420 mm

Overall weight including yokes

75 kg

Maximum power consumption

10 / 11.5 kVA

Standard yokes

40 x 40 x 420 mm
70 x 70 x 420 mm

Core cross section

70 x 70 mm

Yoke storage

Yes, internal

Sliding arm

Yes

Swivel arm

-

Cooling fan

Optional

Housing material

Aluminium

Contact